Foxfury Lighting Solutions 750-500, Product Manual, Page: 3 / 8

3
OVERVIEW
• Eight (8) programmable Light and Sound Modes.
• Four (4) programmable Activation Delays.
Retains all programmed details in memory.
•
ON-READY-OFF Switch
• Programming Switch (small, recessed) - use a small tool like a pen, pencil,
or handcuff key to activate
To Turn ON: Unit must be Readied by pressing ON-READY-OFF Switch,
which lights up Green. When ready to deploy, press Switch again, and the
Green light will start blinking, indicating that the programmed Activation Delay
has begun.
•
To Turn OFF: Pressing the same Switch once more. The Green light goes
off.
Note: Unit is shipped in mode 8 (safety lock). If no response, program unit as specified in
the next section.
PROGRAMMING
Light & Sound programmed by pressing recessed Programming Switch while
the ON-READY-OFF (O-R-O) Switch is in OFF mode. Audible sound provides
feedback. This programming must be entered within 4 seconds.
Press Once: Turbo Strobe and Sound: 2 sec., then STOP
Press Twice: Turbo Strobe and Sound: 10 sec. ON, 30 sec. OFF, then
Repeat
Press 3 times: Light and Sound: 2 sec., then STOP
Press 4 times: Light and Sound: 10 sec. ON, 30 sec. OFF, then Repeat
Press 5 times: Turbo Strobe: 2 sec., then STOP
Press 6 times:
Light ON Continuous (must be turned off by user)
Press 7 times: Sound: 2 sec., then STOP
Press 8 times: Safety Lock
Note: Modes are retained in memory.