Foxfury Lighting Solutions 480-331, Product Manual

Page: 8 / 12

8
FEATURES (CONT’D) FEATURES (CONT’D)
DUAL SETTINGS
The Taker B30 includes two mode settings: the ON/OFF SETTING and the
TACTICAL SETTING. The ON/OFF SETTING simply allows the Light Head
to turn ON and OFF. The TACTICAL SETTING allows you to choose from
three (3) different Operational Modes: Momentary, Continuous On, and Turbo-
Strobe™. The Taker B30 comes in the TACTICAL SETTING.
To change from the TACTICAL SETTING to the ON/OFF SETTING:
With the light turned OFF, press the Power/Mode Switch twice in rapid
succession and hold for 10 seconds. The light should begin to flash. Once
it begins flashing, it is now in the ON/OFF SETTING.
To change from the ON/OFF SETTING to the TACTICAL SETTING:
With the light turned OFF, press and hold the Power/Mode Switch for 10
seconds. The light should begin to go through a slow Turbo-Strobe™ cycle
and then turn OFF. It is now in the TACTICAL SETTING.
REPLACEABLE LENS
The LEDs of the B30 are protected by a lens that can easily be replaced if it
were to be damaged.
HEAVY DUTY BRAIDED CABLE
The cable of the B30 is made of steel that protects the internal wiring. The
installed Black Cable Sleeve (P/N 51-035) helps to protect the steel cable while
providing a black covering.
RETROFIT
The B30 can retrofit to most ballistic shields without drilling or permanent
modification.