Foxfury Lighting Solutions 200-4N32 Product Manual Download Page 16

16

WARNINGS

FoxFury, LLC is not responsible for the 

incorrect use of any FoxFury Lighting 

product. 

When used for extended periods of 

time the light will become HOT to 

the touch. Please use care when 

operating. 

Lights are strong enough to cause 

damage to the human eye. 

 

Do not stare into LEDs for long  

 

periods of time or from a close  

 

range (less than 2 ft).

 

FoxFury, LLC is not responsible  

 

for any injury or damage caused  

 

during the use of this product.

 

Usage of this product must be  

 

supervised by an adult when it is  

 

being used by a minor.

Any FoxFury product should be  

operated at speeds safe enough 

to  maneuver around surrounding 

obstacles.

 

Do not use under the influence  

 

of drugs or alcohol.

LIMITED LIFETIME 

WARRANTY 

FoxFury, LLC (“FoxFury”) warrants 
this product to be free from defects 
in material for a lifetime of use except 
for batteries, LEDs, abuse, and 
normal wear. We will repair or replace 
this product should we determine it 
to be defective. This limited lifetime 
warranty excludes rechargeable 
batteries, chargers, switches, and 
electronics, which have a 2-year 
warranty with proof of purchase.

This limited lifetime warranty is 
given only to the original end user of 
the accompanying product. If you 

WARRANTY AND OTHER  

INFORMATION

IPX7

3 M

1 M

PRODUCT DURABILITY                           

CARE/CLEANING

Your FoxFury product is a professional 

tool. Regular maintenance and care of 

your light will maximize performance for 

you. As needed, wash your FoxFury 

product using a soft washcloth, clean 

water and a mild soap. Be sure that the 

Battery Pack is reassembled securely 

before washing. When done, pat dry with 

a damp cloth.

AVAILABLE ACCESSORIES

Nomad

®

 NOW AC Adaptor-DC 

Cord Set, P/N 600-120 

Nomad

®

 NOW Battery Kit 

Replacement, P/N 600-200-400
Nomad

®

 Wall Mount Kit,  

P/N 85-044
Nomad

®

 NOW Horizontal Right 

Angle Mount, P/N 85-046
Nomad

®

 NOW Magnetic Mount,  

P/N 85-040
Puck Adaptor, P/N 85-045
Nomad

®

 NOW Utility Mount,  

P/N 85-048
Small FoxFury Duffel Bag,  

P/N 850-200-400
Accessories Bag, P/N 600-250

Remote Key Fob: Multi Activation, 

P/N 51-123

Tripo-Scope

®

 

M1, P/N 650-100

Sliding Diffuser Lens, P/N 51-011

Summary of Contents for 200-4N32



















Reviews: