manualshive.com logo in svg

Foxfury Lighting Solutions 200-400-100, Product Manual

Share
Download
Foxfury Lighting Solutions 200-400-100 Product Manual Download Page 13

13

REPLACING THE BATTERY PACK

4 MINS ESTIMATED

1.  Attach the new Battery Pack to the light by re-clipping it the Connector. 

Then, place the new Battery Pack back inside the Nomad

®

 NOW.

2.  Place the black strap over the Battery Pack. Then, re-insert and tighten 

the two (2) screws.  

3.  Place the rear panel back onto the Nomad

®

 NOW. Align as needed (it will 

only properly fit in one direction). Re-insert and tighten the eight (8) screws 
using a Phillips screwdriver.

NOTE: Remember to test the light’s performance by activating the Power/
Mode Switch.

REMOVING THE SLIDING DIFFUSER LENS

3 MINS ESTIMATED

1.  Slide the Sliding Diffuser Lens back into the 'Area' setting. Locate  

and remove the four (4) screws located on each side of it.

2.  Then, tilt the Sliding Diffuser Lens forward.

3.  Pull the Sliding Diffuser Lens out and free from the Light Head.

FOR RE-INSTALLATION: Repeat the steps above in reverse order.

2

1

3

1

2

3

Summary of Contents for 200-400-100


















Reviews:

No comments

Brands by name

Popular brands

Load more brands