6
WARNINGS
Please fully charge the Power Pack before using the Nomad
®
Transformer
®
for the first time.
Do not stare into LEDs for long periods of time or from a close range
(less than 2 ft or 0.6 m).
When used for extended periods of time the Nomad
®
Light Head will
become HOT to the touch. Please use care when operating.
Be sure to rinse the Nomad
®
Transformer
®
with fresh water immediately
after use in the ocean or a pool.
Do not connect power to the Power Pack until the Charging Port is dry
and clear of debris.
1. Plug AC Power Cord of AC-DC Adaptor into a wall outlet or power source.
The AC Power Cord is Universal to NEMA 5-15P, 3 prong for USA
and will work with a power range of 100VAC–240VAC 50/60 Hz and
277VAC for North America only, 50/60 Hz.
2. The 5 PIN Connector has a white dot. Make sure that it is pointing up. Plug
the 5 PIN Connector into the Charging Port of the Power Pack. Turn the
blue Locking Ring to secure the connector.
Input voltage: 12–24VDC.
When the Charge Indicator FLASHES green, it indicates that the
Power Pack is being charged. When the Nomad
®
Transformer
®
is
completely charged, the Charge Indicator will turn solid green.
Charging time is approximately 8 hours.
WARNINGS:
•
Please DO NOT leave AC-DC Adaptor plugged in to Power Pack for more
than eight (8) continuous hours.
•
Continuously charging (leaving the unit plugged in) could damage the
Battery Pack and lead to a decreased battery life.
•
Extended periods of charge could also result in the batteries being placed
in thermal runaway mode.
•
Use of any non FoxFury supplied AC-DC Adaptor will void Product
Warranty.
HOT
!
!
!
CHARGING THE POWER PACK
1
2
!