Foxconn NF3GK8MA series User Manual Download

Page: 67 / 70

Chapter 5 NVIDIA RAID Introduction

4. Press Enter to continue with operating system Installation. Be sure to copy the

files from the floppy is complete, then take out the floppy.

5. Follow the instructions on how to install operating system. During the GUI portion

of the installation you might be prompted to click Yes to install the RAID driver. Click

Yes as many times as needed in order to finish the installation. This will not be an

issue with a signed driver.

Note: Each time you add a new hard drive to a RAID array, the RAID driver will have

to be installed under Windows once for that hard drive. After that, the driver will not

have to be installed.

ＮＦ３ＵＫ８ＭＡ－ＮＦ３ＧＫ８ＭＡ－ｍａｎｕａｌ－Ｖ１．１．ｐ６５

2005-3-16, 17:34

Summary of Contents for NF3GK8MA series







































































Search results

Summary of Contents for NF3GK8MA series

Reviews:

Related manuals for NF3GK8MA series

Brands by name

Popular brands

Foxconn NF3GK8MA series, User Manual

Search results

Summary of Contents for NF3GK8MA series

Reviews:

Related manuals for NF3GK8MA series

Brands by name

Popular brands