3
33
SATA Configuration
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
SATA Configuration
Onboard SATA Controller
[Enabled]
SATA Mode
[Native Mode]
Serial-ATA Controller 0
[Compatible]
Serial-ATA Controller 1
[Enhanced]
▶ SATA Port1:Not Present
▶ SATA Port2:Not Present
▶ SATA Port3:Not Present
▶ SATA Port4:Not Present
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Ports Device Names if
Present and Enabled.
Advanced
► Onboard SATA Controller
This item is used to enable or disable the onboard SATA controller.
► SATA Mode
This item is used to set the operating mode of your SATA ports. Setting options:[Disabled];[Nat
ive IDE Mode]; [AHCI Mode].
[Native IDE] - This configures the SATA ports to support native IDE mode.
[AHCI] - The Advanced Host Controller Interface (AHCI) specification describes the register
level interface for a Host Controller for Serial ATA. The specification includes a description of
the hardware/software interface between system software and the host controller hardware.
AHCI provides more advanced features including SATA features, but some SATA drives may
not support AHCI, unless they are labeled with AHCI support in its specification.
If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI,
then you can select IDE option to have fair performance (only PATA, SATA level), or you can
select AHCI to get its best performance.
► Serial-ATA Controller 0 (Appears when “SATA Mode” is set to [IDE Mode])
Serial-ATA Controller 0 are the SATA ports 1, 2, 3, 4 of
the motherboard. This item allows you
select the mode of the SATA ports. Setting values are: [Disabled], [Compatible], [Enhanced].
► Serial-ATA Controller 1 (Appears when “SATA Mode” is set to [IDE Mode])
Serial-ATA Controller 1 are the SATA ports 5,6 of t
he motherboard. This item allows you select
the mode of the SATA ports. Setting values are: [Disabled], [Enhanced].
►
SATA Port1/SATA Port2/SATA Port3/SATA Port4
Press <Enter> to go to its submenu. This item is used to show the SATA Device information.
