2
17
S/PDIf oUT Connector : SPDIf_oUT
The connector is used for S/PDIF output.
fan Connectors : CPU_fAN, SYS_fAN1
There are two main fan headers on this motherboard.
The fan speed can be controlled and monitored in
“Health” section of the BIOS Setup. These fans can be
automatically turned off after the system enter S3, S4
and S5 sleeping states.
+5V
EMPTY
SPDIF_OUT
GND
1
2
3
4
SPDIF_OUT
CPU_FAN/SYS_FAN1
GND
POWER
SENSE
CONTROL
1
LPT
Strobe
Data it [0]
Data it [1]
Data it [2]
Data it [3]
Data it [4]
Data it [6]
Data it [5]
Data it [7]
ACK
Busy
Paper End
Select
Auto Feed
Error
SLCT IN
INIT
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Empty
1
2
25 26
lPT Connector : lPT
The connector supports parallel port which can
be connected to a printer or a scanner. System
usually assign IRQ7 as it’s default interrupt
request and the parallel port has three operation
mode: [SPP], [EPP], [ECP].
