background image

36

3

load optimal Defaults

Optimal defaults are the best settings of this motherboard. Always load 
the Optimal defaults after updating the BIOS or after clearing the CMOS 
values.
Select this option and press Enter, it will pop out a dialogue box to let 

you load the defaults. Select <OK> and then press <Enter> to load the 

defaults. Select <Cancel> and press <Enter>, it will not load. 
By this default, BIOS have set the optimal performance parameters of system to improve the 
performances of system components. But if the optimal performance parameters to be set cannot 
be supported by your hardware devices (for example, too many expansion cards were installed), 
the system might fail to work.

Save & Exit Setup

When you select this option and press <Enter>, a message 
will be displayed in the center of the screen:

Select [OK] to save your changes to CMOS and exit the 
program, select [Cancel] or <ESC> to return to the main 

menu.

Exit Without Saving

If you select this option and press <Enter>, the following message 
will be displayed in the center of the screen:

Select [OK] to exit CMOS without saving your modifications,
select [Cancel] or <ESC> to return to the main menu.

Save configuration changes and exit setup?

[OK]                           [Cancel]

  

[OK]

Discard changes and exit setup?

[OK]               [Cancel]

[OK]

Load Optimal Defaults?

[OK]            [Cancel]

[OK]

Summary of Contents for D41S series





































































Reviews: