3
43
► Start PWM Value
It allows you to set an initial PWM value to drive the fan when the temperature reaches “Start
PWM Temperature” value.
► Slope PWM Value
It is used to set a slope value in PWM/Temperature diagram. The PWM value is subject to the
temperature input value by linear changing.
bIoS Security features
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to
input user password optionally.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
BIOS Security Features
Scurity Settings
Help Item
Supervisor Password : Not Installed
Enter or change the
User Password
: Not Installed
password.
Change Supervisor Password
[Press Enter]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
Enter New Password :
