5
79
8. You can see in the previous example, about 40GB of Channel 1 and 2 hard disks were
allocated. Select the remaining spaces from them for RAID 0 again.
LD No LD Name
RAID Mode Drv
LD 2 Logical Drive 1
RAID 0 2
Stripe Block:
64 KB
Fast Init:
ON
Gigabyte Boundary:
ON
Cache Mode:
WriteThru
Port :ID Drive Model Compatibilities Capacity(GB) Assignment
1 :Mas HDS728090PLA380
SATA 3G
42.34
Y
2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G
80.03
Y
3 :Mas Hitachi HDT725025VLA3 SATA 3G
250.05
N
4 :Mas ST3320620AS
SATA 1.5G
320.07
N
[↑] Up [↓] Down [PaUp/PaDn] Switch Page [Space] Change Option
[Ctrl+Y] Save [ESC] Exit
[ Define LD Menu ]
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
[ Keys Available ]
[ Define LD Menu ]
[ Drives Assignment ]
Y
9. Press [Ctrl-Y] to save the setting. And a message prompts. You kann select any of
the two options. Here we select the latter option as an example.
LD No LD Name
RAID Mode Drv
LD 2 Logical Drive 2
RAID 0 2
Stripe Block:
64 KB
Fast Init:
ON
Gigabyte Boundary:
ON
Cache Mode:
WriteThru
Port :ID Drive Model Compatibilities Capacity(GB) Assignment
1 :Mas HDS728090PLA380
SATA 3G
82.34
Y
2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G
120.03
Y
3 :Mas Hitachi HDT725025VLA3 SATA 3G
250.05
N
4 :Mas ST3320620AS
SATA 1.5G
320.07
N
[↑] Up [↓] Down [PaUp/PaDn] Switch Page [Space] Change Option
[Ctrl+Y] Save [ESC] Exit
[ Define LD Menu ]
[ Define LD Menu ]
[ Drives Assignment ]
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
Please press Ctrl-Y key to input the LD name
or press any key to exit.
If you do not input any LD name,the default
LD name will be used.
[ Keys Available ]