Foxconn 865M01 G Series User Manual Download Page 61

Page: 61 / 111

Chapter 3 BIOS Description

865M01G/PE/GV User Manual

Integrated Peripherals

Use the arrow keys to select your options; press the <Enter> key to enter the
setup sub-menu. The options and setting methods are discussed below:

Onchip IDE Menu

IDE HDD Block Mode (Default: Enabled)

This option is used to set whether the IDE HDD Block Mode is allowed. The
available setting values are: Disabled and Enabled.

IDE DMA transfer access (Default: Enabled)

This option is used to set up the IDE transfer access—with it set to Enabled,
the IDE Transfer Access uses the DMA mode; with it set to Disabled, the IDE
Transfer Access uses the PIO mode

On-Chip Primary PCI IDE (Default: Enabled)

Use this item to enabled or disable the Primary PCI IDE channel that is inte
grated on the motherboard.

Integrated Peripherals Menu

Summary of Contents for 865M01 G Series
















































































































Search results

Summary of Contents for 865M01 G Series

Reviews:

Related manuals for 865M01 G Series

Brands by name

Popular brands

Foxconn 865M01 G Series, User Manual

Search results

Summary of Contents for 865M01 G Series

Reviews:

Related manuals for 865M01 G Series

Brands by name

Popular brands