background image

Chapter 3     BIOS Description

30

865G/GV/PE7MC User Manual

BIOS Features

™

[SuperBoot] SuperBoot (Default: Disabled)

SuperBoot allows system-relevant information to be stored in CMOS upon the
first normal startup of your PC, and the relevant parameters will be restored to
help the system start up more quickly on each subsequent startup. The avail-
able setting values are: Disabled and Enabled.

™

[SuperBIOS-Protect] SuperBIOS-Protect (Default: Disabled)

SuperBIOS-Protect function protects your PC from viruses, e.g. CIH. The avail-

able setting values are: Disabled and Enabled.

™

[Super Speed] CPU Clock (Depending on the specification of the CPU)

The conventional over-clock method uses the jumpers on the motherboard,
and it is both troublesome and apt to errors. By using Super Speed, a
CPU can be overclocked by keying in the desired in the CPU clock range.

For more detailed information, please visit our website:

http://www.foxconnchannel.com.cn

BIOS Features Menu

Warning:

Be sure your selection is right. CPU overclock will be dangerous!

We will not be responsible for any damage caused.

Summary of Contents for 865G





















































Reviews: