Foxconn 661FX7MJ Series User Manual Download Page 48

Page: 48 / 81

Chapter 3 BIOS Description

IRQ [3-7,9-15], NMI

This option is used to enable or disable IRQ[3-7,9-15], NMI.

IRQ 8 Break Suspend

This option is used to enable or disable IRQ8 break suspend.

RING Power Up Control

If this option is enable, it allows the system to resume from a software power
down or power saving mode whenever there is an incoming call to an in-
stalled fax/modem. This function needs to be supported by the relevant hard-
ware and software.

MACPME Power Up Control

This option is used to enable or disable the system to be waken up by onboard
LAN.

PCIPME Power Up Control

This option is used to enable or disable the system to be waken up by PCI
card.

PS2KB Wakeup from S3/S4/S5

This option is used to set which action will wake up PS/2 keyboard from S3/
S4/S5status. The setting values are Any Key, Hot Key, Password.

PS2MS Wakeup from S3/S4/S5

This option is used to set which action will wake up PS/2 mouse from S3/S4/
S5 status.

PM Wake Up Events Menu

PDF

文件使用

"pdfFactory"

试用版本创建

www.fineprint.com.cn

Summary of Contents for 661FX7MJ Series


















































































Search results

Summary of Contents for 661FX7MJ Series

Reviews:

Related manuals for 661FX7MJ Series

Brands by name

Popular brands

Foxconn 661FX7MJ Series, User Manual

Search results

Summary of Contents for 661FX7MJ Series

Reviews:

Related manuals for 661FX7MJ Series

Brands by name

Popular brands