7410F IFL Installation and Users Guide
Installation
Foxcom Proprietary Information
22
Document No. 93-006-01-A
2. If the 7180M has Tx or Rx units only, place all jumpers on the lower two pins.
Figure 8 - Jumper Installation: Tx and Rx Only
3. If the 2000 Switch is installed in Slot 2, place the JP1 and JP2 jumpers on the higher two pins and the JP3 and JP4
jumpers on the lower two pins.
Figure 9 - Jumper Installation: 2000 Switch in Slot 2
4. If the 2000 Switch is installed in Slot 5, place the JP1 and JP2 jumpers on the lower two pins and the JP3 and JP4
jumpers on the higher two pins.