13
Push the large end of the flexible hose into
the blow connection in the top of the motor
housing (Fig. 1)
Ensure the power switch is turned off and
plug in the power supply (Fig. 2)
Switch on the power (position ) (Fig. 3)
The unit will now blow through the vacuum
hose and can be used to clear obstructions
within the pipe (Fig. 4)
Warning! If, after a few seconds, the hose
is still blocked, turn off the unit and clear
the hose manually.
1. Ensure the machine is unplugged from
the power supply (Fig. 1)
2. Disconnect the hose from the container
(Fig. 2)
3. Undo the clasps and remove the motor
head from the container (Fig. 3)
4. Open the drain outlet cover to allow the
vacuumed liquid to drain out. Clear out
any dirt or debris from the container and
hose (Fig. 4)
5. Clean the foam filter by washing it in a
mild soapy solution (Fig. 5)
6. Check the hoses and attachments, and check the power cable to make sure it has not
received any damage (Fig. 6)
BLOWING
VACUUM MAINTENANCE