9
UNPACKING AND CLEANING
Your new thicknesser is packaged in a cardboard box. Unpack it carefully, taking care with the loose parts. Remove
the protective coating from all non-painted parts. This can be removed by means of a soft cloth moistened with WD40.
Do not use acetone, petroleum or paint thinner.
Note :
if any parts are damaged or missing, do not connect the machine to the power and do not switch it on until the
missing/damaged parts are replaced.
Do not throw away the cardboard box until you are sure the machine is working correctly.
Loose Parts Bag
1.
"C" Circlip
4 pieces
2.
Knife setting guide
2 pieces
3.
Knife setting gauge shaft
1 piece
4.
Base lock screw
8mm x 50 (L) 4 pieces
5.
Elevation knob lock screw
6mm x 15 (L) 1 piece
6.
Cutterhead raising hand crank
1 piece
7.
Allen wrenches
4, 5, 6mm
8.
Screwdriver handle
1 piece
9.
Screwdriver shank
1 piece
10.
Open end wrench
8 x 10 1 piece
