fox fury RUGO, Product Manual

Page: 5 / 8

8
9
¼"-20 AND COLD-SHOE MOUNT
1. Start with the Rugo ™ positioned so that the Thumbscrews are on top.
2. Twist each Thumbscrew counter-clockwise until they become loose. They
should then be ready to pull out completely.
3. Once Thumbscrews are removed, the ¼"-20 or Cold-shoe mount can then
be disengaged from the Rugo
™
completely.
STANDARD MOUNT
1. Start with the Rugo ™ positioned so that the Thumbscrews are on top.
2. Twist each Thumbscrew counter-clockwise until they become loose. They
should then be ready to pull out completely.
3. Once Thumbscrews are removed, the Standard Mount can then be
disengaged from the Rugo
™
completely.
REMOVING/CHANGING MOUNTS
1
1
1
2
2
3
3
2 3
1 2 3
MOUNTING TO DEVICES
ACTION CAM
The Rugo
™
can be mounted to an Action Cam via the removable Standard
Mount. Line up the mounts on the Rugo
™
with the mounts on the Action Cam
and then tighten the Mount Knobs.
TRIPOD OR PUCK ADAPTOR
The Rugo
™
can be mounted to most tripods or to the Puck Adaptor
(purchased separately) via the provided ¼"-20 Mount. Twist the threaded
hole of the Rugo
™
¼"-20 Mount onto the screw of the tripod or Puck Adaptor.
Then, twist the Rugo
™
and Puck Adaptor until it is securely fastened.
CAMERA
The Rugo
™
can be mounted to a DSLR camera via the removable Cold-shoe
Mount. Simply slide the mount onto the camera flash attachment and twist the
Locking Ring until securely fastened.
NOTE: Orientation of Knobs should match as shown below.