SAFETY PRECAUTIONS
CAUTION
TO REDUCE THE RISK OF ELECTRONIC SHOCK, DO NOT
REMOVE THE COVER OR WORK ON THE INTERNAL
COMPONENTS IF YOU ARE NOT A QUALIFIED
ELECTRONICS TECHNICIAN
To insure safe and trouble free operation follow all safety and operating
instructions in this manual.
FOR YOUR SAFETY
§
Disconnect the 220v AC before removing the FX255 cover.
§
Do not expose the FX255 to water or excessive moisture.
§
Do not connect external devices, chargers or batteries to the internal 12 volt
supply.
§
Always select the battery switch to the OFF position to disconnect the internal
battery when the FX255 is not in use.
§
Use a damp cloth for cleaning.
VENTILATION:
There should be at least 10cm space between the top, rear and sides of the FX255
to allow ample ventilation. Do not close any of the ventilation holes on the lid.
POWER REQUIREMENTS:
220v AC 50Hz
13.8V DC external adaptor
To keep the warranty void the FX255 base station may only be repaired by an
Fox electronics authorized repair technician. Any unauthorised repairs can cause
poor performance of your equipment.
2