FOVNO RS-03B2, Instructions Manual, Page: 6 / 10

13
Correct
Error
Crank fixing
· To avoid the cranking or bumping of the cranks in the process of
driving, the crank should be fixed to the bike frame with crank strap.
· The crank should be fixed before the bike is put on the rack, to
prevent the crank from rotating and scratching the paint.
Choose the right place
· The front rack should be mounted on a flat place, do not install the rack on the advertising
area, on the glass, or on the seam.
· Place the bike handlebar forward when fixing bike on the car roof.
Rack installation method
· Clean up the car roof and suction foot with water and towel.
· Wipe the suction foot and car roof surface with a clean wet towel, prevent the roof rack
from sliding o due to accumulated water. Then put the roof rack on the chosen location,
press the suction foot vertically against the car roof with one hand while the other hand
pushes the cylinder rod to extract the air until the white line is in the pump. And make sure
there is no obvious sign of rebound from the cylinder rod. Remove the bike front wheel then
lock the front fork on the roof rack.(The angle of the front fork clamp on both sides of
Three-bike rack can be adjusted depending on the bike model to avoid interference between
the handlebars.)
Installation and Removal
Press the cylinder rod Install the front fork to the fork clamp