ASSEMBLY INSTRUCTIONS
3
STEP 1
ATTACH WIRE SHELF (B) TO THE LEG FRAME (A) USING BOLT
(F) AND PLASTIC WASHER (H) WITH ACCESSARY ALLEN
WRENCH (J) AS SHOWN.
IMPORTANT:
DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 2
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT:
DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 3
REPEAT STEP 1, ATTACH WIRE SHELF (B) TO THE LEG FRAME
(A) USING BOLT (F) AND PLASTIC WASHER (H) WITH
ACCESSARY ALLEN WRENCH (J) AS SHOWN.
IMPORTANT:
DO NOT TIGHTEN THE BOLTS AT THIS TIME
STEP 4
ATTACH TOP PANEL (E) TO THE STEP (3) METAL FRAME USING
SCREW (G) WITH PHILIPS SCREWDRIVER AS SHOWN, THEN
TIGHTEN ALL THE BOLTS AND SCREWS.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY, FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACE TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOL REQUIRED:
PHILIPS SCREWDRIVER
A
A
B
H
FF
F
STEP 5
ATTACH THE LOCKING CASTER (K) AND CASTER (L) TO THE
STEP (4) FRAME WITH ACCESSARY WRENCH (J) AS SHOWN.
STEP 6
UNFOLD THE NON-WOVEN BIN (C) AND PLACE THE BOTTOM
PLATE (D) INTO THE BIN (C) AS SHOWN.
STEP 7
PLACE THE NON-WOVEN BIN (C) TO THE SHELF AS SHOWN.
CAUTION:
MAXIMUM LOADING CAPACITY FOR EACH SHELF IS
10 LBS (4.5 KG)
