STEP 1
ATTACH BRACKET (4) TO FRONT&BACK SUPPORT PANEL (B) (C) AND SIDE SUPPORT
PANNEL (D) AS SHOWN.
PASO 1
ADJUNTE EL SOPORTE (4) AL PANEL DE SOPORTE FRONTAL Y TRASERO (B) Y (C)
AL SOPORTE LATERAL (D) COMO SE MUESTRA.
STEP 2
ATTACH WOODEN DOWEL (3) TO LEFT LEG PANEL (D) AND RIGHT LEG PANEL (E).
STEP3
ATTACH DRAWER SLIDE (7A) TO RIGHT SLIDE PANEL (I) AND LEFT SLIDE
PANEL (H) BY USING SCREW (8); AND THEN ATTACH WOODEN DOWEL (4) TO
RIGHT SLIDE PANEL (I) AND LEFT SLIDE PANEL.
STEP 4
ATTACH RIGHT AND LEFT SLIDE PANEL (I) (H) TO FRONT&BACK SUPPORT
PANEL (B) (C) FROM ASSEMBLED BY STEP 1.
ASSEMBLY INSTRUCTIONS
INSTRUCCIONES DE ENSAMBLAJE
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS. CARE SHOULD
BE TAKEN IN THE UNPACKING AND ASSEMBLING OF THIS PRODUCT.
2. ASSEMBLE ON SOFT SURFACE TO PREVENT DAMAGE TO THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLING.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS CAREFULLY.
FOLLOW STEP BY STEP.
PRECAUCIÓN:
1. SE REQUIERE LA SUPERVISION DE UN ADULTO DEBIDO A LA EXISTENCIA
DE PIEZAS PEQUEÑAS. DEBE TENER CUIDADO AL DESEMPACAR Y EN EL
MONTAJE DE ESTE PRODUCTO.
2. ENSAMBLELO SOBRE SUPERFICIES SUAVES PARA EVITAR DAÑAR EL
ACABADO DEL PRODUCTO.
3. ASEGURESE DE QUE ESTÉN TODAS LAS PIEZAS ANTES DEL MONTAJE.
ANTES DE COMENZAR, POR FAVOR LEA CUIDADOSAMENTE LAS
INSTRUCCIONES DE MONTAJE. SEGUIRLAS PASO A PASO.
STEP 5
ATTACH SIDE SUPPORT PANEL (D) TO FRONT&BACK SUPPORT PANEL (B) (C)
FROM ASSEMBLED BY STEP 4 BY USING SCREW (1).
ASSEMBLY TOOLS REQUIRED
SCREWDRIVER
HAMMER
HERRAMINETAS DE MONTAJE REQUERIDOS
DESTORNILLADOR
MARTILLO
5
D
B
C
D
