Need Assistance? Call 800-639-3803 or visit www.fourstari.com
STEP 1
ATTACH L-BRACKETS (7) TO BOTH CROSSBARS (D) USING SCREWS (6).
STEP 2
ATTACH MEDIUM TUBE (2) TO INSERT CAP. DO NOT OVER TIGHTEN TUBE.
STEP 3
INSERT DOWELS (8) INSERT ONLY HALF OF THE DOWEL INTO THE TOP OF
SIDE PANELS (B) & (C) WITH GLUE (9).
STEP 4
INSERT GLUE (9) INTO THE DOWEL HOLES AND ATTACH SIDE PANELS (B) & (C)
TO THE TOP PANEL.
STEP 5
ATTACH CROSSBARS (D) TO SIDE PANEL (B) & (C) USING SCREW (5).
STEP 6
6.1 ATTACH L-BRACKET (7) TO TOP PANEL (A) USING SCREW (6)
6.2 ATTACH BACK PANEL (E) TO SIDE PANEL (B) & (C) USING SCREW (5)
STEP 7
ATTACH PLASTIC FOOT W/PIN (10) TO END OF SIDE PANELS (B) & (C)
WITH MALLET.
STEP 8
ATTACH SIDE CENTER SHELF (F) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH LONG TUBE (1) TO MEDIUM TUBE (2). DO NOT OVER TIGHTEN
TUBE.
8
STEP 9
ATTACH SIDE BOTTOM SHELF (G) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH FOOT (3) TO LONG TUBE (1).
DO NOT OVER TIGHTEN FOOT.
C
A
D
F
D
E
G
3
B
5
To clean the computer desk, wipe
with soft, dry cloth. Apply a small
amount of cleaning solution to the
cloth if required. Do not use abrasive
cleaners in order to prevent the
scratching the surfaces.
(3) 3.8CM (1.49”) FOOT - 1 PC
(G) SIDE BOTTOM SHELF - 1 PC
(5) 38MM (1.49”) SCREW - 2 PCS
