4
Maintenance
To clean your digital photo frame, please refer to the instructions below:
NOTE: To prevent electrical shock, do not open the Camcorder casing. Leave repair
of the frame to qualified personnel, please see the tech support information in the
warranty.
1. Check the cover
Check to see if the camcorder and accessories are damaged, broken, or strained. If so, please
consult the warranty card for Tech Support information.
2. Clean
Never spray or pour any liquid directly onto the screen or frame. Avoid allowing any water or
liquid from entering the DV Camcorder or accessories.
3. Cleaner
Use water or non-ammonia/non-alcohol based glass cleaner. Do not use harsh or abrasive
cleaners such as ketene (such as acetone), ethanol, toluene, acetic acid, methane, chloride, or
other detergents to clean the camcorder, these chemicals can damage the LCD screen or the
camcorder.
4. Screen
To clean the LCD screen or case of the camcorder, use water or a mild cleaner, as listed
above. Moisten a soft, clean cloth or if possible, use a special screen cleaner sheet or a
solution suitable for static electricity application. Using any cleaner other than water or a mild
cleaner may damage your digital photo frame and will not be covered under the warranty.
5. Storage of Unit
If the Camcorder is not in use for a long time, please unplug it and store it in its original box in
order to avoid any damage.
6. Disclaimer
Any damage resulting from use of any cleaner that is not mentioned above is not covered
under the terms of the warranty on this product.
.
