6
Setting up the Monitors
1.
Clear a flat clean area and place a large soft cloth to set your monitors down upon in order to attach the dual screen
stand to the monitors. Make sure there are no sharp objects in the area that can make contact with the LCD monitor
screens that may cause damage to the screens. Leave the transparent sheet attached to the front of the monitors in
place as this will protect the panels.
2.
Carefully slide the mounting bracket back into the monitor stand while the monitor lies flat on the table top. Tighten the
thumb screw and then carefully repeat this step with the other monitor.
Slide the bracket and monitor into the stand.
Tighten the thumb screw to secure the mounting bracket to the stand.
3.
The monitors are now installed to the stand, you may now connect the cables and power cord to your monitors while the
unit is in this position. DO NOT lift the monitors by the base, please make sure to hold both ends of the mounting rail (as
shown below) when carrying the monitors.
You may now connect the AC, Audio and Video cables.
Power and Videos\Audio cables attached and placed
through cord management loop.
Do not lift the monitors by the base.
Carry the monitors by grasping both ends of the mounting rail.
