Four winns FUNSHIP Owner'S Manual Download

Page: 13 / 185

Owner’s Manual Page

Preface

Congratulations.on.your.new.boat.purchase.and.welcome.to.our.boating.family!

We.want..your.boating.experience.to.be.the.most.enjoyable.possible..The.more.you.know.about.your.new.boat,.

the.more.you’ll.enjoy.the.time.you.spend.aboard..That’s.why.we.prepared.this.manual..It’s.your.guide.for.safe.

operation.as.well.as.understanding.your.boat’s.system.and.equipment..It.has.been.written.for.the.beginning.

boater but experienced boaters will find helpful information as well. Be sure to read the contents thoroughly.

This.manual.will.acquaint.you.with.the.use.and.maintenance.of.your.new.Four.Winns.boat..This.manual.also..

provides.special.information.critical.to.the.safety.of.the.passengers,.and.longevity.of.the.equipment..The.infor-

mation.on.the.following.page.lists.the.graphics.used.to.increase.the.visibility.of.these.important.messages...

Also.included.in.your.owner’s.packet.is.the.“Boating.Basics,.A.Guide.to.Responsible.Boating”..This.guide..

covers.boating.basics.and.should.be.read.along.with.your.Four.Winns.owner’s.manual.before.operating.your.

boat..Review.this.information.completely.before.using.your.new.boat.

Four Winns continually strives to improve its products. Unit specifications, including standard and optional

equipment are constantly being modified.

Equipment availability is also subject to change without notice.

The most current and accurate information available at the time of publication is included in this

manual. Some variation in material, equipment, description, location, and details can result.

The.information.in.this.manual.focuses.upon.the.equipment.designed.and.manufactured.by.Four.Winns.on..

specific models. When appropriate, please utilize the information pertinent to your specific boat model.

Equipment.such.as.engines,.and.other.accessories.are.manufactured.by.others..

The information provided

in this manual is intended to be used in conjunction with the information provided by the manufacturers

of this equipment.

.All.information.available.at.the.time.of.manufacture.has.been.included.with.your.owner’s.

packet..In.many.cases,.replacement.of.manufacturer’s.literature.may.be.obtained.via.their.respective.websites.

Read this entire manual carefully before operating your new boat.

Many.instructions.may.require.direct.

performance.of.the.activity.to.fully.understand.the.correct.method..If.you.choose.to.read.this.manual.at.home,.

remember.to.take.it.to.the.boat.with.you.

Your.Four.Winns.dealer.knows.your.boat.best.and.is.committed.to.your.complete.satisfaction..Return.to.the.

dealer for service or other assistance. If you find it necessary to contact Four Winns directly, please refer to the

contact information listed below. Be sure to include the boat model, hull identification number, your daytime

telephone number, and specifics of the information desired.

This manual has been specifically developed for the Funship™ models.

Please.record.the.model.and.hull..

identification number information below.

Model

Hull Identification Number

This.manual.should.be.considered.part.of.the.boat..Should.you.sell.the.boat,.pass.this.manual.on.to.the.new.

owner..Take.special.care.of.this.manual..Certain.information.in.this.manual.may.not.be.available.in.a.replace-

ment.manual..An.electronic.version.of.this.manual.may.be.viewed.on.our.website.at.www.fourwinns.com.

Thank.you.for.joining.the.Four.Winns.family..We.appreciate.your.purchase.and.welcome.the.opportunity.to..

demonstrate.our.commitment.to.you.

Four Winns Customer Service Department

925 Frisbie Street

Cadillac, Michigan 49601

231 775-1343 (Phone) 231 779-2345 (Fax)

Preface

Summary of Contents for FUNSHIP


























































































































































































Search results

Summary of Contents for FUNSHIP

Reviews:

Related manuals for FUNSHIP

Brands by name

Popular brands

Four winns FUNSHIP, Owner'S Manual

Search results

Summary of Contents for FUNSHIP

Reviews:

Related manuals for FUNSHIP

Brands by name

Popular brands