( ) R7 100, 2W Brown-Black-Black-Black ( ) R8 100, 2W
Brown-Black-Black-Black
Double check the soldering on these resistors – the larger pads on the board require extra heat or time to
prevent cold solder joints.
( ) Save one of the resistor leads, and insert and solder on the back of the board at the jumper position
marked TEST, between SW1 and SW2 positions.
( ) R9 24.9k Red-Yellow-White-Red ( ) R10 24.9k
Red-Yellow-White-Red ( ) R11
NO NOT
INSTALL NOW!
( ) R12 49.9k Yellow-White-
White-Red ( ) R13 100k Brown-Black-Black-Orange
( ) R14 100k Brown-Black-Black-Orange ( ) R15
1.0M Brown-Black-Black-Yellow ( ) R16 100k
Brown-Black-Black-Orange ( ) R17 24.9k Red-
Yellow-White-Red ( ) R18 4.75k Yellow-Violet-
Green-Brown ( ) R19 4.75k Yellow-Violet-Green-
Brown ( ) R20 100k Brown-Black-Black-Orange ( )
R21 100k Brown-Black-Black-Orange ( ) R22 100k
Brown-Black-Black-Orange ( ) R23 604k Blue-
Black-Yellow-Orange ( ) R24 10.0k Brown-Black-
Black-Red ( ) R25 100k Brown-Black-Black-Orange
( ) R26 1.0M Brown-Black-Black-Yellow ( ) R27
1.0M Brown-Black-Black-Yellow ( ) R28 49.9k
Yellow-White-White-Red ( ) R29 39.0k Orange-
White-Black-Red ( ) R30 100k Brown-Black-Black-
Orange ( ) R31 1.21k Brown-Red-Brown-Brown ( )
R32 2.74k Red-Violet-Yellow-Brown ( ) R33 1k 10
turn potentiometer ( ) R34 100k Brown-Black-Black-
Orange ( ) R35 1.0M Brown-Black-Black-Yellow ( )
R36
DO NOT INSTALL NOW!
( ) R37 24.9k Red-
Yellow-White-Red ( ) R38 4.75k Yellow-Violet-
Green-Brown ( ) R39 1.0M Brown-Black-Black-
Yellow ( ) R40
DO NOT INSTALL NOW!
( ) R41
2.0M Red-Black-Black-Yellow ( ) R42 1.65k
Brown-Blue-Green-Brown ( ) R43 24.9k Red-
Yellow-White-Red ( ) R44 100k Brown-Black-
Black-Orange ( ) R45 49.9k Yellow-White-White-
Red ( ) R46 49.9k Yellow-White-White-Red ( ) R47
604k Blue-Black-Yellow-Orange
