Assembly Instructions
Choose a good, cleared assembly area and get a friend to help you put your gas fire pit together.
Lay cardboard down to protect gas fire pit finish and assembly area.
Step 1
Fig. 1
Place the Table Top Frame (A) upside
down to the soft, level surface, attach
control panel assembly (C) to the Table
Top Frame (A) with (4) M5x12
bolts
assembly
(AA) as Fig. 1.
Insert valve into the injection pipe of
burner as illustrated (Position A).
Insert the end of electrode wire into
valve as illustrated (Position B).
Adjust the distance between the ignition
pin and flame orifice to be 4-5mm in
case of ignition failure (If ignition failure
issue happened)
.
4-5mm
4-5mm
Note: With the help of a friend, turn the
table top upside down to begin assembly.
Hardware Used
AA
M5 x 12 Bolt Assembly
A
C
x 4
AA
AA
Position B
Position A
Injection Pipe
Electrode Wire
Valve
ignition pin
flame orifice
8
