F8L10GW LoRa Gateway
Page 13 of 37
Add
：
11th Floor, A-06 Area, No.370, Chengyi Street, Jimei, Xiamen, Fujian, China.
http://www.four-faith.com
Tel：+86-592-6307217 Fax: +86-592-5912735
Figure 2-3-1 Unscrew the M6 screws
Figure 2-3-2 Insert SIM/UIM card
2.3.2 Wall-mounted Installation
Step 1: The wall where the gateway is installed must be flat and open-sided, make
sure no shield within 5 meters around LoRa antenna. Drill 3 holes of ø14mm
diameter, 60 mm depth (swelling screw is about 50mm long) according to the
position of the bracket mounting holes,
Figure 2-3-3.
(Note: Press the shelf against the wall, mark it, and then punch the hole in the wall.)
