F3946 Series Router User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 46 of 82
Add
：
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
：
//www.fourfaith.com
Tel
：
+86 592-6300466 6300465 6300464
Fax
：
+86 592-5912735
3.3.3.4
IPSEC
Global settings
Enable NAT-Traversal:
Enable or disable nat traversal function
Debug Level:
Enable or disable debug
Connect Status and Control
Show IPSEC connection and status of current router on IPSEC page.
Name:
the name of IPSEC connection
Type:
The type and function of current IPSEC connection
Common name:
local subnet, local address, opposite end address and opposite end subnet of
current connection
Status:
connection status: closed, negotiating, establish
Closed:
this connection does not launch a connection request to opposite end
Negotiating:
this connection launch a request to opposite end, is under negotiating, the
connection has not been established yet
Establish:
the connection has been established, enabled to use this tunnel
Action:
the action of this connection, current is to delete, edit, reconnect and enable
Delete:
to delete the connection, also will delete IPSEC if IPSEC has set up
Edit:
to edit the configure information of this connection, reload this connection to make
the configuration effect after edit
Reconnect:
this action will remove current tunnel, and re-launch tunnel establish request
Enable:
when the connection is enable, it will launch tunnel establish request when the
system reboot or reconnect, otherwise the connection will not do it
Add:
to add a new IPSEC connection
Add IPSEC connection or edit IPSEC connection
Type:
to choose IPSEC mode and relevant functions in this part, supports tunnel mode client,
tunnel mode server and transfer mode currently
