F7916 Series IP MODEM User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 25 of 37
Add
：
Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen.
China
http://en.four-faith.com
Tel
：
+86 592-5907276
Fax
：
+86 592-5912735
Debug Level
Level 1
：
simple prompt information output
Level 2
：
detail debug information output
Debug Port
Port 1
：
debug info send to port 1
Port 2
：
debug info send to port 2
485
：
debug info send to RS485
3.3.4 Data Service Center Settings
Settings on this page are the parameters related to Data Service Center (DSC).
3.3.4.1 Data Service Center
IP MODEM support two Data Service Center methods to transmit data.
Main and Backup
: IP MODEM always tries to connect with the Main DSC. If fails to connect
with Main DSC, it will connect with Backup DSC at once
Note
：
If no Backup DSC exists, please configure the Backup DSC same as Main DSC.
Multi Data Service Center
: IP MODEM can connect with at most five DSC at the same time.
All the multi DSC can receive the same application data .
Reconnect Int.(s)
reconnect time interval in second
Connect Retry Times
reconnect times
Back To Main Server
This item is only valid when you set
“
Data Center Number
”
as 1. In
this mode, IP MODEM will switch to backup center when main center
have problems. If this item is set to 1 , IP MODEM will check whether
