F3B3X Series Router User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 44 of 94
Add
：
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
：
//www.fourfaith.com Tel
：
+86 592-6300326 6300325 6300324 Fax
：
+86 592-5912735
router listed, with a signal reading. If the signal is "0dBm" then there may be something wrong.
Check your antenna connections and configuration settings, and try again.
7. Once you have a good signal (-70dBm to -30dBm, -70dBm being lowest), you can change the
Internet Connection Type on the Basic Setup page of the second router to Disabled and set the
Gateway
to the LAN IP Address of the first router. You can now run normal tests to check if you
are connected (like ping).
Lzay WDS:
Default is disabled
.
Note
：
WDS is only available in AP mode. Also Wireless encryption WPA2 and Wireless network
mode B-Only are not supported under WDS.
3.3.3
Services
3.3.3.1
Services
DHCP Client
Set Vendorclass:
the DHCP server can automatically identify the specific identifier of the
computer running certain operating systems to send, such as the DHCP server can identify the
DHCP client running the operating systerm is Windows 2000 or Windows 98.
Identification identifier DHCP option can be assigned to DHCP clients based on specific operating
system.
Request IP:
IP address of the request
DHCP Server
DHCPd assigns IP addresses to users local devices. While the main configuration is on the setup
page users can program some nifty special functions here.
