F2X46-DK Series IP Modem User Manual
Xiamen Four-Faith Smart Power Technology Co.,Ltd
.
Add
:
Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen.China
Page 20 of 33
Fax
:
0592-5912735
Tel
:
0592-6300320
Hotline
:
400-8838-199
Support platform gateway
: Need to fill in the IP address and port number of the
WMMP center;
Support platform connection mode
: Only support UDP;
Support platform heartbeat interval (seconds)
: Heartbeat interval associated with
the WMMP protocol only, range: 4~3600
SMS center number
: SMS center number which is needed, in Xiamen is
8613800592500
SMS alarm number (SMS data number)
: SMS registration, binding, alarm number
that WMMP protocol requires.
3.2.6
“
Enterprise gateway related Settings
”
DTU device number
:
The user set it to identify DTU
Enterprise Gateway
: Need to fill in IP address ,port number and domain name of
center(if IP and domain name are filled in at the same time, IP shall prevail)
Enterprise gateway connection mode
: TCP
、
UDP
、
DCTCP
、
DCUDP (Option)
Maximum number of retransmission allowed for transmission failure
: 0 (TCP
protocol retransmission utomatically).
Enterprise gateway heartbeat interval (minutes)
: Time interval of heartbeat pack,
range: 1~60
DNS IP1
:
0.0.0.0 or fill in private domain name resolution server address
DNS IP2
:
0.0.0.0
3.2.7 “Multi IP data center”
When chose multi centers mode, fill in the IP address, port number and connection
mode of extension 1 enterprise gateway ~ extension 4 enterprise gateway, leave blank for
single center mode.
Note: In the case of multi-center setting, please fill in the IP and port of each center
correctly. In the case of non-multi-center setting, please set all non-center IP and port to
zero.
3.2.8 “Multi connection strategy”
Minimum reconnection interval (seconds): The minimum interval in TCP between failed
connections and reconnections.
Maximum reconnection interval (seconds): The maximum interval in TCP between
failed connections and reconnections.
Polling mode(Y/N): In multicenter mode, select multicenter connections for polling or
concurrent mode, input “Y”or”y” indicate using polling mode, all other inputs indicate using
concurrent mode.
TCP serve port/UDP source port
:
Listen on the port when it as TCP Server (Fill in 0