F2X46-D Series IP Modem User manual
Tel
：
0592-6300320
Fax
：
0592-5912735
Page 27 of 31
Xiamen Four-Faith Smart Power Technology Co.,Ltd
.
Add
：
Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen.China
Hotline
：
400-8838-199
Charpter 5 Test
In this section, we will introduce how to test., check whether the device can work or not.
We suggest that for first-time users, test the device before using it. There are three
conditions before your test:
1
、
A computer with Internet access, run the test software-”F2X14D_DC.exe” on this
computer
，
in order to listen for a certain TCP/UDP port for communication.
2
、
Use RS232 serial port line to connect the device to the computer.
3
、
A SIM card that has already open data service.
5.1 DC Test
5.1.1 DCUDP mode
Open “F2X14D_DC.exe”, showing as below:
Working mode must be configurated to DCUDP. Connect terminal device’s port (Such
as PLC, we use a computer simulate it here. ) to F2X46-D’s port, after it, power up them all.
1
、
Click “UDP” to enter DCUDP mode:
2
、
The default listener port is 1203. You can modify it by the menu“Setting”->“Setting
