Safety Instructions
• Read the operating instructions in full before starting up and
follow the safety instructions.
• Keep the operating instructions in a place where they can be
accessed by everyone.
• Ensure that only trained staff work with the appliance.
• Follow the safety instructions, guidelines, occupational health
and safety and accident prevention regulations.
• Socket must be earthed (protective ground contact).
• Before starting the device for the first time, ensure that the
connector cable is suitable for the type of socket used and
that a safe protective earth connection is assured.
•
Risk of burns!
Exercise caution when touching the housing
parts and the heating plate. The heating plate can reach
temperatures in excess of 100 °C. Pay attention to the residual
heat after switching off.
The device may not be transported
unless it is cold!
• Don’t operate the appliance in explosive atmospheres, with
hazardous substances or under water.
• Set up the appliance in a spacious area on an even, stable,
clean, non-slip, dry and fireproof surface.
• The base plate must be clean and intact.
• The voltage stated on the type plate must correspond to the
mains voltage.
• The socket for the mains cord must be easily accessible.
• The power adapter cable must not be allowed to come into
contact with the hot mounting plate.
• Check the appliance and accessories before hand for damage
each time you use them. Do not use damaged components.
•
Caution!
Only media whose flashpoint lies above the safety
temperature limit of 130 °C may be processed or heated with
this device.
2
