8
Repeat the steps from 2-6 until the full FourUs Corner is assembled.
Page 1: ...Corner 1 ATTENTION 1 ALL BOLTS AND SCREWS ATTACHED NEED TO BE USED FOR CORRECT ASSEMBLY 2 Do not use a knife or other sharp object to unpack the product 3 Always be at least two persons to set up the...
Page 2: ...lace it in the bracked on the corner seat Aim the screw on the toppart into the keyhole 4 Detach the cushion Push from the bottom and up and when they click it is possible to pull them off Connect the...
Page 3: ...6 The last threaded rod is to be attached under the bench parts in the beams being next to each other The holes for the threaded rod is to be found approximately 3cm away from the bench front beam 7...
Page 4: ...8 Repeat the steps from 2 6 until the full FourUs Corner is assembled...
