Four Design FourUs Corner, Instruction, Page: 1 / 4

Instruction to assemble FourUs Corner modules
Four Us
®
Corner
Tools used in the manual:
2x size 13” socket wrench
Drill with bits accordingly
Rubber hammer
FourUs Corner:
1
ATTENTION:
1) ALL BOLTS AND SCREWS ATTACHED NEED TO BE USED FOR CORRECT ASSEMBLY!
2) Do not use a knife or other sharp object to unpack the product.
3) Always be at least two persons to set up the FourUs Booth.
4) Make sure to be gentle when handling the Booth components.
5) Be careful not to let the fabric touch the floor, as it can be damaged or get dirty.