Wiring Guide
The follow wire connection guide should be used for your installation. This
guide shows the most common configurations. Contact Founten for
assistance with configurations not shown on this guide.
Conventional Systems
(Single Transformer)
(Two Transformers)
1 Heat & 1 Cool
1 Heat & 1 Cool
2 Heat & 1 Cool
2 Heat & 1 Cool
2 Heat & 2 Cool
2 Heat & 2 Cool
1 Heat & 2 Cool
1 Heat & 2 Cool
Heat Pump Systems
1 Heat & 1 Cool
1 Heat & 1 Cool with Aux Heat
2 Heat & 2 Cool
Configuration
All of the thermostat configuration settings can be made through the
Founten Site Manager Web Application. These can be found under the
Admin
section. Each thermostat will be listed with it's serial number and the
label
Thermostat Setup.
Most configuration items can be left at their default
setting. For proper operation it is necessary to set the correct System Type
(Conventional or Heat Pump). If the Web Application is not yet available,
the System Type can be set directly using the thermostat front keypad.
3
