5
The camera provides the following connections for external devices: USB port, SD card slot, TV out jack, and external DC
power in jack. The 3-way Power/Mode Switch is used to select the main operation modes:
OFF
,
ON
and
TEST
.
To supply power, use four
NEW
high-‐performance alkaline or lithium AA batteries. FOR BETTER PERFORMANCE,
WE RECOMMEND USING
ENERGIZER LITHIUM AA BATTERIES.
To achieve longer in-‐field life, always install the
additional battery box which contains four more AA batteries. (Please reference Appendix III: Instruction on
Installing Additional Battery Box)
Figure 1.3: Back View
QUICK START
2.1 Load Batteries
Let us begin with loading the batteries. Please follow the instructions below.
·
Open the bottom cover by pulling down the lock hole.
·
Push the cover of the battery compartment and release. It will pop out.
·
Install 4 AA batteries. Make sure the polarity matches the sign on the cover.
·
Replace the cover.
Alternatively the camera can run on an external 6V DC power source (optional, user provided). When both external power
and batteries are connected, the camera will be powered by the external one.
2.2 Insert SD Card
