Table of Contents
Description
Page
Safety Notes
Content of Carton
Preparing Your Flash For Use
Power Supply Connection
Light Holder with umbrella Hole
Operating the modeling lamp
Triggering the flash
Audible Beep Settings
Flash Output
Changing the flash Tube
Changing the fuses
Overheating Protection
Flash Capacitor Preventative Maintenance
Specifications
02
03
03
05
06
06
06
07
07
08
09
09
09
10
Thanks for selecting this compact flash unit. Please read these instructions
carefully and keep them for your reference. FQM Series is a powerful, self
contained AC powered, electronic flash unit.
This flash provides flexibility in positioning and ease of use.
Please make sure that you are completely familiar with the operations and features of your
new flash before using.
Safety Notes
• Do not use your flash in an environment where moisture or flammable vapour could come
in contact with the unit.
• A fire hazard exists if flammable materials are placed close to either the flash tube, or the
modelling lamp when the flash unit is in use.
• Do not restrict air vents while in use.
• Always switch off and isconnect from the main power before changing fuse, modelling lamp
or flash tube.
• Avoir placing cables where they can be tripped over. Protect from heavy, sharp or hot object,
which may cause damage. Replace damaged cables immediately.
• Never use a unit with damaged covers, mouldings, flash tubes or modelling lamp. If the unit
is dropped or damaged in any way always have it checked before using it for work.
• Use a blower brush or clean facial tissue to remove dust and moisture from the modelling
lamp and the flash tube. Do not apply any fluids to the modelling lamp or the flash tube.
• Turn the power off, and unplug the power cord if the flash is not going to be used
for a while.
USER GUIDE
FQM
Series
