9
10
360 DEGREE LED TUBE LIGHT
360 DEGREE LED TUBE LIGHT
6.
The USB port is used to upgrade the light software
USB upgrade steps:
1.Download the upgrade program to the USB disk from www.fotodiox.com
2.Remove the dust cover from the USB port. Insert the USB flash drive with the upgrade program into
the USB port on the back of the light.
3.Power on the light, DATA indicator flashes, LCD screen lights up.
4.The upgrade time is approximately 15 seconds. After the upgrade is complete, remove the USB flash
drive and replace the dust cover on the USB port.
Upgrade software can be downloaded from www.fotodiox.com when available.
(3) When the second line “MODE” of the LCD display is selected, press the /
buttons to change between
different lighting effect as below .
FX
[4/4]
DIM: 10%
MODE: Clr
.
Chase
FX
[4/4]
DIM: 10%
MODE: Candle
FX
[4/4]
DIM: 10%
MODE: Fire works
FX
[4/4]
DIM: 10%
MODE: Strobe
FX
[4/4]
DIM: 10%
MODE: Cop Car
FX
[4/4]
DIM: 10%
MODE: Lightning
Battery level display
1.Set up instructions:
Take the ball head and the tube light out of the package. Screw the ball head onto a light stand which has a 1/4”-20
stud until tight. Attach the light on the ball head via ¼”-20 femail thread on light fixture. The angle of the tube light
can be adjusted by the turning the ball head locking knob counterclockwise to loosen. Turn the locking knob
clockwise to secure the light in the desired position.
Ball head locking knob
2.Battery handle usage precautions:
(1)Battery level display
Press the red button at the bottom of the power display window. The four small cells above will show the battery
level. When the last frame shows orange, the battery needs to be charged.
Operating instructions
