9
Problem
Possible cause
Solution
Lamp does not light
up
Lamp is switched off
Switch lamp on, see
Insert and remove
lamps
Lamp is not inserted into
socket tightly enough
Insert lamp into socket more tightly
Lamp is defective
Replace lamp, see
Insert and remove
lamps
10.
Maintenance of the device
10.1
Continuous inspection and maintenance of the device
What you should do
Before each
use
After each
change
Check all cables and plugs for damages
If damaged:
WARNING!
Danger of electric shock and fire due to short
circuit
Have the device repaired by an electrician immediately
X
Check if the lamps are inserted into sockets tightly
If damaged:
WARNUNG!
Danger of electric shock and fire due to short
circuit
Have the device repaired by an electrician immediately
X
10.2
Cleaning
WARNING
Danger of cutting and splitting due to breaking or bursting lamps
Do not allow for the lamps to fall.
Only touch the lamp at the plastic socket or with a clean cloth or with clean gloves.
WARNING
Danger of electric shock
Never allow for the device to get in touch with wetness or water.
Always unplug power cord before cleaning the device.
NOTE: Please use exclusively the cleaning supplies specified in the following table.
Beauty Ring Light 90W
Cleaning
Casing
Remove light and persistent stains with microfiber cloth
Lamp
Dab off with dust brush or dry, soft cloth
NOTE:
Do not clean the lamps with water. Even small residues on the
lamps can cause the lamps to burst
