
11
Model X-34 Owner’s Manual
<Using both MIC IN jack and LINE IN/INSERT jack>
Keep the following information about the MIC IN and LINE IN/INSERT jacks in mind when recording sound
sources using both types of input jacks.
The front panel LINE IN/INSERT jack has priority. For example, if you attempt to input different sound sources
(Sound source A, Sound source B) simultaneously from the front panel LINE IN/INSERT jack 1 and the rear panel
MIC IN jack 1/3, priority will be given to the LINE IN/INSERT jack 1 to send the signal to channel 1, and the signal
from the MIC IN jack 1/3 will be sent to only channel 3.
Since Sound source A is routed to channel 1 and Sound source B is routed to channel 3, selecting a recording track
using the corresponding REC TRK switches enables you to record Sound sources A and B simultaneously. The
same applies to LINE IN/INSERT jack 3 and MIC IN jack 1/3.
PUNCH
IN/OUT
12V
DC IN
ON
STANDBY
OFF
ON
DOLBY NR
TAPE OUT
1
2
3
4
MIC IN jack 1/3 (Sound source B)
Channel 3
Channel 1
LINE IN/INSERT jack 1 (Sound source A)
Sound source B will be recorded to a
track selected by the REC TRK switch
on channel 3.
Sound source A will be recorded to a
track selected by the REC TRK switch
on channel 1.
Channel 1
If you connect Sound sources A and B to LINE IN/INSERT jacks 1 and 3, and Sound source C to MIC IN jack 1/3,
Sound source C will be ignored and cannot be recorded simultaneously. (The same applies to LINE IN/INSERT
jacks 2 and 4 and MIC IN jack 2/4.)
Y
OFF
ON
DOLBY NR
TAPE OUT
1
2
3
4
MIC IN jack 1/3 (Sound source C)
Channel 3
Channel 1
LINE IN/INSERT jack 1 (Sound source A)
Channel 1
LINE IN/INSERT jack 3 (Sound source B)
Channel 3
Sound source C is not recorded.
Sound source B will be
recorded to a track select-
ed by the REC TRK switch
on channel 3.
Sound source A will be
recorded to a track select-
ed by the REC TRK switch
on channel 1.