Product Specifications
Cable and Wiring Information
Product Cleaning Instructions
Cabinet Dimensions
Amplifier Power
Amplifier Distortion
Amplifier Signal to Noise Ratio
Net Weight
6.5 Kg
16 Kg
14.3 Pounds
35.2 Pounds
Gross Weight Per pair (includes all packing material)
Frequency Response
20Hz - 30kHz Not Weighted
Low Frequency : 35 Watts
High Frequency : 35 Watts
Amplifier Slew Rate
15V/ sec
>84dB
<0.001
%
THD @ 25Watts / 8Ohm 20Hz-20kHz
Product improvement may warrant a change of specifications, newer materials or cosmetics, Changes in
specifications and features may be made without notice or obligations.
Use high-quality, shielded cables to connect your mixing console, workstation or other source to your
monitors. Foil-shielded cables, such as Belden 8451, 8761, or 9501 should do quite well. Other high
quality cables are available and those that incor porate better shielding will yield an overall higher noise
rejection, lowering your systems susceptibility to external interference. Another important tip to keep in
mind when wiring your system is to route all line level cables away from the AC and other power
sources, this will reduce the probability of having AC hum emanating from your studio monitors.
181mm (W) × 280mm (H) ×260mm (D) includes heatsink
230mm (D) cabinet only - no heatsink
7 1/8" (W) × 11" (H) × 10 1/4" (D) includes heatsink
9" (D) cabinet only - no heatsink
Free-Field Frequency Response : ±2dB 50Hz to 20KHz
Low Frequency Cutoff : 40Hz (-10dB)
High Frequency Cutoff : 22kHz (-10dB)
HOT (+)
XLR
PIN 2
PIN 3
PIN 1
TIP
TIP
RING
COLD (-)
SHIELD (
GROUND
)
Prior to cleaning the PM0.5 MK
Ⅱ
monitor the power must be disconnected from the PM0.5 MK
Ⅱ
monitor.
Once the power has been terminated, cleaning can be accomplished using a damp (not wet) cleaning
rag. A light common household cleaner can also be used, but care must be taken not to use harsh
cleaning fluids. Regular dusting or cleaning with a damp rag will keep your product looking new for years.
Power Requirements
Power consumption
US : 120VAC~60Hz
EUR/UK : 230VAC~50/60Hz
US : 35 Watts
EUR/UK : 40 Watts
p-6
RCA
TRS
SHIELD
SHIELD
