background image

NX-6A (Powered Near Field Studio Monitor)

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER - SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

11. Grounding or Polarization - The precautions that should be taken

so that the grounding or polarization means of an appliance is
not defeated.

12. Power Cord Protection - Power supply cords should be routed

so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they
exit from the appliance.

13. Cleaning - The appliance should be cleaned only as

recommended by the manufacturer.

14. Nonuse Periods - The power cord of the appliance should be

unplugged from the outlet when left unused for a long period of
time.

15. Object and Liquid Entry - Care should be taken so that objects

do not fall and liquids are not spilled into the enclosure through
openings.

16. Damage Requiring Service - The appliance should be serviced

by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or

exhibits  a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Servicing - The user should not attempt to service the appliance

beyond that described in the operating instructions.
All other servicing should be referred to qualified service
personnel.

18. The appliance should be situated away from drops of water or

spray of water.

19. Objects containing liquid such as vase must not be put on the

appliance.

20. The appliance is not completely isolated from the power supply

even if the power switch is at off position.

21. Apparatus shall not be exposed to dripping or splashing and no

objects filled with liquids, such as vases, shall be placed on the
apparatus.

22. Only use attachments/accessories specified by the

manufacturer.

23. An appliance with a protective earth terminal should be

connected to a mains outlet with a protective earth connection.

24. Where the MAINS plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain readily
operable.

The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'
AU FOND.

An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.

7. Wall or Ceiling Mounting - The appliance should be mounted to

a wall or ceiling only as recommended by the manufacturer.

8. Ventilation - The appliance should be situated so that its location

or position dose not interfere with its proper ventilation.
For example, the appliance should not be situated on a bed,
sofa, rug, or similar surface that may block the ventilation
openings; or, placed in a built-in installation, such as a bookcase
or cabinet that may impede the flow of air through the ventilation
openings.

9. Heat - The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.

10. Power Sources - The appliance should be connected to a power

supply only of the type described in the operating instructions or
as marked on the appliance.

"WARNING"

"TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE."

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should

be followed.

5. Water and Moisture - The appliance should not be used near

water - for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and
the like.

6. Carts and Stands - The appliance should be used only with a

cart or stand that is recommended by the manufacturer.

Summary of Contents for NX-6A










Reviews: