NX-5A (Powered Near Field Monitor)
7
Enclosure positioning
Adopting the time alignment construction, as well as mounting the woofer and tweeter closely, the NX-5A
provides a wide monitoring area.
We recommend to install the NX-5As vertically, as shown below, not only from the point of view of audio
phase characteristics but also from the point of view of radiation of the built-in power amplifier. As a hu-
man ear is sensitive in the left-right direction, setting the unit horizontally is undesirable from the point of
view of phase characteristics.
Vertical positioning
Horizontal positioning
Maintenance precautions
Be careful when cleaning speaker/enclosure surfaces!!
•
No protecting grilles or covers are provided with
NX-5A. Brush off dust attached to surfaces of
speakers with soft dusters. Avoid direct fingers or
damp dust cloth contact with diaphragms.
•
Stained enclosure surfaces must be wiped with
tightly wrung-out soft cloth after immersion in a
diluted detergent. Under no circumstances must
organic solvents such as paint thinner be used.
To get the best of the NX-5A performance, set them at the appropriate height so that the middle point
between the center positions of the tweeter and woofer matches the listener’s ear height.
Then, orient them 15 to 30 degrees inward to form a triangle as shown in the Figure below.
The vertex of the equilateral triangle in the Figure is best listening position.
• Optimal listening point and setting
Center of the woofer
Center of the tweeter
Mid-point of the woofer and tweeter
Listener
15 to 30 degrees inward
15 to 30 degrees inward
