manualshive.com logo in svg

Fostex MR16, Owner'S Manual, Page: 107 / 170

Share
Download
Fostex MR16 Owner'S Manual Download Page 107

107

MR16 

 Owner’s Manual (Data export to a personal computer)

Connection to a personal computer

Connect the [

USB

] port of the MR16 to the USB port of a personal computer using a USB cable, as

shown above. (A USB cable is not supplied with the MR16.)

Windows Me/2000/XP machine supporting
USB connection

USB cable

<Note>: 

Only Windows Me, 2000 and XP computers, as well as Macintosh computers with OS X or

higher, can be used with the MR16.
Other computers cannot be used. Check your computer before making connection.

<Notes on USB connection with Mac OS>

When making USB connection with a Macintosh computer, note that only Mac OS X or higher is
supported. Do not connect to a Macintosh computer with the earlier version. The song data on the
MR16 may be damaged.

USB

USB HOST

MIDI OUT

DIGITAL OUT

FOOT SW

INPUT A SEL

GTR CLEAN

MIC/LINE

GTR DIST

PC

USB

USB HOST

<Caution>:

 Use the [

USB

] port for connection to a personal computer. Do not connect the [

USB HOST

]

port to a personal computer.

Exporting data to a personal computer

* All company names and model names mentioned in this manual are trademarks or registered trade-
marks of their respective holders.

The unit is equipped with the [

USB

] port for directly connecting to a personal computer using a

USB cable. Via USB connection, you can export audio data converted to a stereo WAV file to a
personal computer. The exported file can be played back or edited on the personal computer, or
can be burned to an original audio CD using the software application (WAV Manager) provided
by Fostex. You can also use the export function for data backup purpose.

<About downloading WAV Manager>

You can download WAV Manager, a software application for multitrack recording provided
by Fostex, from Fostex web site (http://www.fostex.com). Before importing a WAV file from
the MR16 or creating an audio CD, download WAV Manager and install it to your personal
computer. For details about how to use WAV Manager, see the manual supplied with the
downloaded file.

Summary of Contents for MR16











































































































































































Reviews:

No comments