15
Lis
te
nin
g
Setting item
Setting value
"DIGITAL FILTER"
Selects the digital filter.
Default:
"SHORT DLY SHAP"
You can select from one of the 5 types of digital filters
listed below.
"SHORT DLY SHAP"
"SHORT DLY SLOW"
"SHARP ROLL-OFF"
"SLOW ROLL-OFF"
"SUPER SLOW"
"MSCK SEL"
Selects the master clock of the
DAC.
* The internal clock is always
used when the input source is
set to "USB" or "SD" regardless
of this setting.
Default:
"DIR"
"DIR"
Uses the external clock of the digital input source.
"XTAL"
Uses the high precision internal SPXO clock.
"DIRECT"
Selects whether the signal for
the [ANALOG OUT] terminal
goes through
volume
or not.
* The signals for headphones
always go through
volume
regardless of this setting.
Default:
"OFF"
"OFF"
Goes through
volume
(You can change the volume with
volume
)
"ON"
Does not go through
volume
(You can not change the
volume with
volume
)
When you change the setting value and press the
ENTER
key, "WARNING" is displayed, then "ARE YOU SURE?" will
be displayed. Press the
ENTER
key again to determine
the setting value.
"IN/VOL MEM"
Activates the memory function
of the last source and volume.
Default:
"DISABLE"
"DISABLE"
The last source and volume are not memorized.
"INPUT"
Switches to the last source automatically at power on.
The volume is set to MUTE.
"VOLUME"
Switches to the last volume automatically at power on.
The source is set to "COX".
"INPUT+VOLUME"
Switches to the last source and volume automatically at
power on.
