Fostex FR-2 Owner'S Manual Download Page 90

Page: 90 / 110

FR-2

Field Memory Recorder (Chapter 6: MENU mode/Setup menu)

Selecting the remain display mode (Remain Display)

Use the [MENU] dial to select "Setup" and press the [ENTER] key.

The display now shows the first page of the Setup menu.

Use the [MENU] dial to select "RemainDiplay" on the second page and press the
[ENTER] key.

The current setting starts flashing (by default, "Time" flashes).

22.05kHz

44.1kHz/48kHz

88.2kHz/96kHz

176.4kHz/192kHz

2.00s ~ 20.00s (in 2.00s steps)

1.00s ~ 10.00s (in 1.00s steps)

0.50s ~ 5.00s (in 0.50s steps)

0.25s ~ 2.50s (in 0.25s steps)

By pressing the [ENTER] key after selecting the time, the setting is fixed and the display
returns to show the previous screen.

Press the [HOME] key to exit the MENU mode.

This menu item selects whether to show the time or space (MBytes) remaining on
the card for recording. The following description is assumed that the FR-2 is now
in the MENU mode by pressing the [ENTER] key while the recorder is stopped.

Use the [MENU] dial to select the desired option and press the [ENTER] key.

You can select between "Time" (default) and "MByte".

MByte

Time

The remaining space of the memory card is displayed in MBytes.

The remaining time of the memory card is displayed.

By pressing the [ENTER] key after selecting the desired option, the setting is fixed and the
display returns to show the previous screen.

Press the [HOME] key to exit the MENU mode.

When a USB keyboard is connected to the FR-2, you can carry out the following operation.

Acts the same as the [MENU] dial on the FR-2 panel.

Returns to the previous screen layer.

Enter key

Acts the same as the [ENTER] key on the FR-2 panel.

/ keys

key

Summary of Contents for FR-2















































































































Search results

Summary of Contents for FR-2

Reviews:

Brands by name

Popular brands

Fostex FR-2, Owner'S Manual

Search results

Summary of Contents for FR-2

Reviews:

Brands by name

Popular brands