(1)
Select stereo or mono metering .
When the unit is shipped, the display is set to ste-
reo VU and peak metering .
You can change it to L or R channel mono metering
(see page 18 for details) .
<Memo>:
Using the meter status display, you can
disable or enable the peak meter function, select the
VU meter reference level, and select the “OVR” indi-
cator lighting level (see page 22 for details) .
(2)
Adjust the display brightness if required .
When the unit is shipped, the display brightness is
set to “Level 3” .
You can change it to the optimum brightness ac-
cording to the circumstance . See page 17 for de-
tails .
Stereo metering
Mono metering (L)
(1)
C o n n e c t h e a d p h o n e s t o t h e 1 / 4 - i n c h
[PHONES] jack on the front panel or the mini-
phone [PHONES] jack on the right side panel .
You can use both the 1/4-inch and mini-phone
jacks simultaneously .
(2)
Set the monitor select switch to “ST” and
adjust the monitor level using the [PHONE]
control .
1
1
2
2
Preparation of monitoring
Preparation of metering
Summary of Contents for FM-4
Page 27: ...27 External dimensions 274 252 180 57 ...
Page 28: ...28 Memo ...